Part Number Hot Search : 
AN665005 LCX16 SR735 BD242CTU EZQAFDA NQ40W40 MAA436 X4165S8
Product Description
Full Text Search
 

To Download AD1981HDJSTZ Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 HD Audio SoundMAX(R) Codec AD1981HD
FEATURES
2 DAC channels: 16-, 20-, or 24-bit 2 ADC channels: 16- or 20-bit HD audio sample rates 8 kHz, 11.025 kHz, 16 kHz, 22.05 kHz, 32 kHz, 44.1 kHz, 48 kHz Greater than 90 dB dynamic range S/PDIF output: 32 kHz, 44.1 kHz or 48 kHz, 16- or 24-bit Digital beep and analog PC beep pass-through Integrated headphone amplifiers on two ports Port retasking Selectable microphone and line inputs Full analog mixer Legacy inputs: CD and auxiliary inputs External amplifier power-down (EAPD) 48-pin, Pb-free LQFP
ENHANCED FEATURES
No AFILT pins, results in BOM savings 5.0 V AVDD supply, 3.3 V DVDD supply Jack-sensing autoconfiguration options Mute line output and monaural output (MONO_OUT) when headphones are used Mute MONO_OUT when a device is in the line out jack Selectable trip level: high/low supports all jack types Peripheral identification/enumeration Jack event/presence detection using SENSE or GPIO pins Microphone to MONO_OUT for speakerphone applications Advanced power management modes 4 software-controlled microphone bias pins Up to 30 dB microphone boost 4 GPIOs--external control or traditional jack sense
FUNCTIONAL BLOCK DIAGRAM
AVDD AVSS GPIO GPIO PC BEEP RESET 5V
JACK SENSE
SELECTOR
SENSE
SELECTOR
GAM
MONO_OUT
SELECTOR
PCM/AC3 S/PDIF TX
S/PDIF_OUT
GAM
HP
PORT-A HEADPHONE
EQ
PCM - DAC GA GA
SELECTOR
MIC BIAS
Z
MIC_BIAS-D
HD AUDIO INTERFACE
PC BEEP
PC BEEP
M
GAM
BOOST
HP
Z
SELECTOR
M
PORT-D LINE_OUT
DIGITAL PC BEEP
G
M
M M M
SELECTOR
M
M
MIC BIAS
Z
MIC_BIAS-C
GA GA
GA GA
GA
GAM
BOOST
Z
PORT-C LINE_IN
MIC BIAS
Z
MIC_BIAS-F
SELECTOR
PCM/FLOAT32 - ADC
M
G
SELECTOR
GAM
BOOST
Z
PORT-F REAR MIC
M
DIFF AMP
MIC BIAS
Z
MIC_BIAS-B PORT-B FRONT MIC
04321-005
M
BOOST
PORT-E AUX
CD_R CD_GND CD_L
Figure 1. Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c) 2005 Analog Devices, Inc. All rights reserved.
AD1981HD TABLE OF CONTENTS
Functional Block Diagram Details ................................................. 3 Specifications..................................................................................... 4 Absolute Maximum Ratings............................................................ 7 Environmental Conditions.......................................................... 7 ESD Caution.................................................................................. 7 Pin Configuration and Function Descriptions............................. 8 HD Audio Codec Information ..................................................... 10 Jack Presence Detection................................................................. 15 HD Audio Style Jack Presence Detection ............................... 15 Classic Jack Presence Detection ............................................... 15 Outline Dimensions ....................................................................... 16 Ordering Guide .......................................................................... 16
REVISION HISTORY
6/05--Initial Version: Revision 0
Rev. 0 | Page 2 of 16
AVDD 5V AVSS RESET PC BEEP NID: 0B NID: 0F NID: 07 GAM -46.5dB TO +3dB NID: 06 HP HP_EN NID: 05 Z BIAS_EN HP HP_EN BOOST 0dB, 10dB, 20dB, 30dB OUTPUT_EN M M M M BIAS_SEL Z BIAS_EN NID: 09 MIC_BIAS-C MIC BIAS -46.5dB TO +3dB Z OUTPUT_EN PORT-D LINE_OUT MIC_BIAS-D PORT-A HEADPHONE MONO_OUT
NID: 01
JACK SENSE SENSE_A/SRC_B SENSE_B/SRC_A NID: 02
SELECTOR 6:1
GPIO
GPIO_3 GPIO_2 GPIO_1/JS_0 GPIO_0/JS_1
SELECTOR 2:1
48kHz, 24-BIT PCM/AC3 S/PDIF TX -46.5dB TO +3dB BIAS_SEL 48kHz, 24-BIT PCM - DAC NID: 11 GA NID: 1A GA GAM MIC BIAS -46.5dB TO +3dB
NID: 03 EQ
SDATA_IN SDATA_OUT SYNC RESET BIT_CLK NID: 16 PC BEEP IN PC BEEP M M
-34.5 TO +12dB
FUNCTIONAL BLOCK DIAGRAM DETAILS
G M NID: 0E
NID: 10 DIGITAL PC BEEP 0dB TO -45dB NID: 0D M
HD AUDIO INTERFACE
SELECTOR 2:1
SELECTOR 2:1
SELECTOR 2:1
SELECTOR 8:1
NID: 17
PORT-E AUX
AD1981HD
04321-001
CD_R CD_GND CD_L
Rev. 0 | Page 3 of 16
-34.5 TO +12dB
GA NID: 1B GA NID: 1D GA NID: 1C GA NID: 12 GA NID: 13 NID: 15 M G 0dB TO 22.5dB NID: 19 CD DIFF AMP NID: 0C NID: 1F M
SELECTOR 2:1
SELECTOR 2:1
GAM
NID: 0A S/PDIF_OUT
Figure 2.
NID: 1E M
GAM
Z OUTPUT_EN BOOST 0dB, 10dB, 20dB, 30dB OUTPUT_EN BIAS_SEL Z BIAS_EN GAM Z OUTPUT_EN BOOST 0dB, 10dB, 20dB, 30dB OUTPUT_EN BIAS_SEL MIC BIAS BOOST 0dB, 10dB, 20dB, 30dB Z BIAS_EN MIC BIAS -46.5dB TO +3dB
PORT-C LINE_IN
NID: 18 MIC_BIAS-F
DVDD DVSS
3.3V
PORT-F REAR MIC
NID: 04 48kHz, 20-BIT PCM/FLOAT32 - ADC
NID: 08 MIC_BIAS-B PORT-B FRONT MIC
AD1981HD SPECIFICATIONS
Test conditions, unless otherwise noted. Table 1. Test Conditions
Parameter TEMPERATURE DIGITAL SUPPLY (DVDD) ANALOG SUPPLY (AVDD) SAMPLE RATE (FS) INPUT SIGNAL ANALOG OUTPUT PASS BAND VIH VIL VIH VIL Typ 25 3.3 10% 5.0 10% 48 1.0 20 to 20,000 2.0 0.8 2.4 0.6 Unit C V V kHz kHz Hz V V V V
DAC Test Conditions Calibrated Output -3 dB relative to full scale 10 k output load, Ports C, D, F, and mono 32 output load, Port A
ADC Test Conditions Calibrated 0 dB PGA gain Input -3.0 dB relative to full scale Input sourced on Port B, 0 dB boost
Table 2. Analog Input
Parameter PORTS B, C, D, E: 0 dB PORTS B, C, D, E: 30 dB PORTS B, C, D, E: 20 dB PORTS B, C, D, E: 10 dB PORT F, CD IN INPUT IMPEDANCE 2 INPUT CAPACITANCE
1 2
Min
Typ 1 2.83 0.032 0.089 0.1 0.283 0.316 0.894 1 2.83 20 5
Max
7.5
Unit V rms 1 V p-p V rms V p-p V rms V p-p V rms V p-p V rms V p-p k pF
RMS values assume sine wave input. Guaranteed by design; not production tested.
Table 3. Master Volume
Parameter STEP SIZE (Ports A, B, C, D, E, MONO_OUT) OUTPUT GAIN RANGE MUTE ATTENUATION OF 0 dB FUNDAMENTAL
1
Min -46.5 80
Typ 1.5
Max +3
Unit dB dB dB
Guaranteed by design; not production tested.
Rev. 0 | Page 4 of 16
AD1981HD
Table 4. Programmable Gain Amplifier--ADC
Parameter STEP SIZE PGA GAIN RANGE SPAN Min 0.0 Typ 1.5 Max 22.5 Unit dB dB
Table 5. Analog Mixer--Input Gain/Amplifiers/Attenuators
Parameter SIGNAL-TO-NOISE RATIO (SNR) Line In to Line Out Microphone In to Line Out 1 STEP SIZE: ALL MIXER INPUTS (Except PC BEEP) STEP SIZE: PC BEEP INPUT GAIN RANGE: ALL MIXER INPUTS (Except PC BEEP) DIGITAL PC BEEP
1
Min
Typ 85 80 1.5 3.0
Max
Unit dB dB dB dB dB dB
-34.5 -45.0
+12.0 0.0
Guaranteed by design; not production tested.
Table 6. Digital Decimation and Interpolation Filters 1
Parameter PASS BAND PASS-BAND RIPPLE TRANSITION BAND STOP BAND STOP-BAND REJECTION GROUP DELAY GROUP DELAY VARIATION OVER PASS BAND
1
Min 0 0.4 x FS 0.6 x FS -74
Typ
Max 0.4 x FS 0.09 0.6 x FS
16/FS 0
Unit Hz dB Hz Hz dB sec s
Guaranteed by design; not production tested.
Table 7. Analog-to-Digital Converters
Parameter RESOLUTION TOTAL HARMONIC DISTORTION (THD) DYNAMIC RANGE (-60 dB Input, THD + N Referenced to Full Scale, A-Weighted) CROSSTALK: LINE INPUTS (Input L, Ground R, Read R; Input R, Ground L, Read L) CROSSTALK: LINE INPUTS AND OTHER INPUTS GAIN ERROR (Full-Scale Span Relative to Nominal Input Voltage) INTERCHANNEL GAIN MISMATCH (Difference of Gain Errors) ADC OFFSET ERROR Min Typ 20 -95 -85 -80 -100 10 Max Unit Bits dB dB dB dB % dB mV
-80 0.5 5
Table 8. Digital-to-Analog Converters
Parameter RESOLUTION TOTAL HARMONIC DISTORTION (Line Out) TOTAL HARMONIC DISTORTION (Headphone Out) DYNAMIC RANGE (-60 dB Input, THD + N Referenced to Full Scale, A-Weighted) GAIN ERROR (Full-Scale Span Relative to Nominal Input Voltage) INTERCHANNEL GAIN MISMATCH (Difference of Gain Errors) DAC CROSSTALK 1 (Input L, Zero R, Read R Out; Input R, Zero L, Read L Out)
1
Min
Typ 24 -92 -75 90 10
Max
0.7 -80
Unit Bits dB dB dB % dB dB
Guaranteed by design; not production tested.
Rev. 0 | Page 5 of 16
AD1981HD
Table 9. Analog Output
Parameter FULL-SCALE OUTPUT VOLTAGE (Headphone Disabled) Output Impedance 1 External Load Impedance Output Capacitance External Load Capacitance FULL-SCALE OUTPUT VOLTAGE (Headphone Out) Output Impedance External Load Impedance Output Capacitance External Load Capacitance VREF_FILT MIC_BIAS (Ports B, C, D) (xVREF [2:0] = 100, AVDD = 5.0 V) (xVREF [2:0] = 010) Current Drive MUTE CLICK (MUTED OUTPUT, UNMUTED MIDSCALE DAC OUTPUT)
1
Min
Typ 1 2.83 300 15
Max
10 1000 1 2.83 1 32 15 2.050 2.250 2.250 3.700 0.0 5 1000 2.450
5
Unit V rms V p-p k pF pF V rms V p-p pF pF V V V V mA mV
Guaranteed by design; not production tested.
Table 10. Static Digital Specifications
Parameter HIGH LEVEL INPUT VOLTAGE (VIH), DIGITAL INPUTS LOW LEVEL INPUT VOLTAGE (VIL) HIGH LEVEL OUTPUT VOLTAGE (VOH), IOH = 2 mA LOW LEVEL OUTPUT VOLTAGE (VOL), IOL = 2 mA INPUT LEAKAGE CURRENT OUTPUT LEAKAGE CURRENT INPUT/OUTPUT PIN CAPACITANCE Min 0.65 x DVDD 0.90 x DVDD -10 -10 0.10 x DVDD +10 +10 7.5 Typ Max 0.35 x DVDD Unit V V V V A A pF
Table 11. Power Supply
Parameter POWER SUPPLY RANGE--ANALOG (AVDD) 10% POWER SUPPLY RANGE--DIGITAL (DVDD) 10% POWER DISSIPATION--ANALOG (AVDD)/DIGITAL (DVDD) ANALOG SUPPLY CURRENT--ANALOG (AVDD) DIGITAL SUPPLY CURRENT--DIGITAL (DVDD) POWER SUPPLY REJECTION (100 mV p-p Signal @ 1 kHz) Min 4.5 2.97 Typ Max 5.5 3.63 Unit V V mW mA mA dB
275/132 43 40 40
Table 12. D3 Power-Down Savings
Parameter FUNCTION NODE DAC ADC MIXER DVDD 0.5 6.2 8.0 0.0 AVDD 0.0 9.0 8.0 15 Unit mA mA mA mA
Rev. 0 | Page 6 of 16
AD1981HD ABSOLUTE MAXIMUM RATINGS
Table 13.
Power Supply Digital (DVDD) Analog (AVDD) Input Current (Except Supply Pins) Analog Input Voltage (Signal Pins) Digital Input Voltage (Signal Pins) Ambient Temperature (Operating) Commercial Industrial Storage Temperature Min -0.3 -0.3 -0.3 -0.3 0C -40C -65C Max +3.6 +6.0 10.0 AVDD + 0.3 DVDD + 0.3 70C +85C +150C Unit V V mA V V C C C
ENVIRONMENTAL CONDITIONS
Ambient Temperature Rating TAMB = TCASE - (PD x CA) where: TCASE is the case temperature in C PD is the power dissipation in W CA is the thermal resistance (case-to-ambient) Table 14. Thermal Resistance
Package LQFP
1 2
JA 1 76.2C/W
JC 2 17C/W
CA 59.2C/W
Stresses greater than those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
JA is the thermal resistance (junction-to-ambient). JC is the thermal resistance (junction-to-case).
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality.
Rev. 0 | Page 7 of 16
AD1981HD PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
GPIO_0/JS_1 GPIO_1/JS_0 S/PDIF_OUT MONO_OUT
36 PORT-D_R PIN 1 35 PORT-D_L 34 SENSE_B/SRC_A 33 NC 32 MIC_BIAS-D 31 NC 30 MIC_BIAS-F 29 MIC_BIAS-C 28 MIC_BIAS-B 27 VREF_FILT 26 AVSS 25 AVDD 13 14 15 16 17 18 19 20 21 22 23 24
PORT-A_R
PORT-A_L PORT-B_R
EAPD
48 47 46 45 44 43 42
41 40 39 38 37
DVDD 1 GPIO_2 2 GPIO_3 3 DVSS 4 SDATA_OUT 5 BIT_CLK 6 DVSS 7 SDATA_IN 8 DVDD 9 SYNC 10 RESET 11 PC BEEP 12
AD1981HD
TOP VIEW (Not to Scale)
SENSE_A/SRC_B
PORT-E_L
PORT-E_R
PORT-F_R
PORT-C_R
PORT-F_L
PORT-B_L
PORT-C_L
CD_GND
CD_R
CD_L
NC = NO CONNECT
AVDD
AVSS
NC
NC
NC
Figure 3. Pin Configuration
Table 15. Pin Function Descriptions
Mnemonic SDATA_OUT BIT_CLK SDATA_IN SYNC RESET# Pin No. 5 6 8 10 11 I/O I I I/O I I Description HD Audio Link Serial Data Output. Codec input stream. HD Audio Link Bit Clock Input. 24 MHz. HD Audio Link Serial Data Input. Codec output stream. HD Audio Link Frame Sync. HD Audio Link Reset. Master hardware reset.
Table 16. Digital Input/Output Pin Function Descriptions
Mnemonic GPIO_2 GPIO_3 GPIO_0/JS_1 Pin No. 2 3 43 I/O I/O I/O I/O Description General-Purpose Input/Output. Digital signal used to sense/control external circuits. General-Purpose Input/Output. Digital signal used to sense/control external circuits. GPIO_0--General-Purpose Input/Output. Digital signal used to sense/control external circuits. JS_1--Classic (DC) Jack Sense for Headphone Out Pins. Low indicates that nothing is plugged into the jack; high indicates that a peripheral is plugged into the jack. GPIO_1--General-Purpose Input/Output. Digital signal used to sense/control external circuits JS_0--Classic (DC) Jack Sense for Line Out Pins. Low indicates that nothing is plugged into the jack; high indicates that a peripheral is plugged into the jack. SENSE_A--Jack Sense A-D Input. For use with isolated switches on audio jacks. 1 SENSE_B--Jack Sense E-F Input. For use with isolated switches on audio jacks.1 External Amplifier Power-Down Output. S/PDIF Output.
GPIO_1/JS_0
44
I/O
SENSE_A/SRC_B SENSE_B/SRC_A EAPD S/PDIF_OUT
1
13 34 47 48
I/O I/O O O
To reduce SENSE_A/B static current draw, connect a single 2.69 k resistor between Pins 13 and 34. Remove the resistors from Pins 33 and 13 to AVDD.
Rev. 0 | Page 8 of 16
04321-002
AD1981HD
Table 17. Analog Input/Output Pin Function Descriptions
Mnemonic PC Beep PORT-E_L PORT-E_R PORT-F_L PORT-F_R CD_L CD_GND CD_R PORT-B _L PORT-B_R PORT-C_L PORT-C_R PORT-D_L PORT-D_R MONO_OUT PORT-A_L PORT-A_R
1
Pin No. 12 14 15 16 17 18 19 20 21 22 23 24 35 36 37 39 41
I/O I I I I/O I/O I I I I I I/O I/O I/O I/O O O O
Channel N/A Left Right Left Right Left Ground Right Left Right Left Right Left Right Left Right
Description Analog Input for PC Beep Pass-Through, Even While in Reset. Line Input (Typically Auxiliary Input). Line Input (Typically Auxiliary Input). Multifunction Analog I/O Jack (Typically Rear Microphone). Multifunction Analog I/O Jack (Typically Rear Microphone). CD Input, Left Channel. CD Input, Ground. CD Input, Right Channel. Multifunction Analog I/O Jack (Typically Front Microphone). Multifunction Analog I/O Jack (Typically Front Microphone). Multifunction Analog I/O Jack (Typically Rear Line Input). Multifunction Analog I/O Jack (Typically Rear Line Input). Multifunction Analog I/O Jack (Typically Rear Line Output). Multifunction Analog I/O Jack (Typically Rear Line Output). Monaural Output to Telephony Subsystem Speakerphone. Headphone Output, Left Channel. Headphone Output, Right Channel.
Function 1 LI LI MIC, LI, LO MIC, LI, LO LI LI LI MIC, LI MIC, LI MIC, LI, LO MIC, LI, LO MIC, LI, LO MIC, LI, LO LO LO, HP LO, HP
MIC--Microphone capable, includes programmable MIC_BIAS pins and integrated boost amplifier; LI--line level analog inputs; LO-- line level analog outputs; HP--headphone support, includes integrated headphone amplifier.
Table 18. Filter/Reference Pin Function Descriptions
Mnemonic VREF_FILT MIC_BIAS-B MIC_BIAS-C MIC_BIAS-F MIC_BIAS-D Pin No. 27 28 29 30 32 I/O O O O O O Description Voltage Reference Filter. Programmable Microphone Bias Output. Intended for connection to Port B. Programmable Microphone Bias Output. Intended for connection to Port C. Programmable Microphone Bias Output. Intended for connection to Port F. Programmable Microphone Bias Output. Intended for connection to Port D.
Table 19. Power and Ground Pin Function Descriptions
Mnemonic DVSS DVDD AVSS AVDD Pin No. 4, 7 1, 9 26, 42 25, 38 I/O I I I I Description Digital Supply Return (Ground). Digital Supply Voltage (3.3 V). Analog Supply Return (Ground). Analog Supply Voltage (5.0 V). AVDD supplies should be well filtered because supply noise degrades audio performance.
Rev. 0 | Page 9 of 16
AD1981HD HD AUDIO CODEC INFORMATION
Table 20. Widget List and Descriptions
NID 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 Name ROOT FUNCTION S/PDIF Front DAC Record ADC Port-D (Line Out) Port-A (Headphone Out) MONO_OUT Port-B (Front Microphone) Port-C (Line In) S/PDIF_OUT Monaural Selector Microphone Mixer PC Beep Selector Analog Mixer Monaural Mixer Digital PC Beep Front Mix Amp Port-B Mix Amp Port-C Mix Amp Analog Power-Down Record Selector PC Beep In Type ID x x 0 0 1 4 4 4 4 4 4 3 2 3 2 2 7 3 3 3 5 3 4 Type Root Function Audio output Audio output Audio input Pin complex Pin complex Pin complex Pin complex Pin complex Pin complex Audio selector Audio mixer Audio selector Audio mixer Audio mixer Beep generator Audio selector Audio selector Audio selector Power widget Audio selector Pin complex Description Device identification. Designates this device as an audio codec. Designates the codec S/PDIF digital stream output interface. Designates the playback channel digital/audio converters. Designates the record channel audio/digital converters. Port-D pin drivers. Typically used as rear panel line output. Port-A pin drivers. Typically used as front panel headphone output. Monaural output pin driver. Typically used to drive an internal speaker or as a microphone selector on a telephony system. Port-B pin drivers. Typically used as front panel microphone. Port-C pin drivers. Typically used as rear panel line input. S/PDIF output digital interface. Chooses which signals drive the monaural output mixer and pin. Allows selective mixing of the front/rear microphone sources to a single combined signal. Selects between the digital beep generator and the analog PC BEEP pin as the source for the analog mixer. Selectively mixes analog input signals into a single signal. Stereo-to-monaural mixer for MONO_OUT. Digital PC beep generator. Individual gain control for the DAC (front) input to the Analog Mixer. Individual gain control for the Port-B (front microphone) input to the analog mixer. Individual gain control for the Port-C (line in) input to the analog mixer. Power control on the analog mixer and associated amplifiers. Chooses which signal is recorded by the record ADC. Also contains the record gain controls. Analog PC Beep in pin drivers. This signal is coupled to the outputs while the codec is held in reset. This may be selected as an input to the analog mixer after reset has been released. Port-E pin drivers. Typically used as auxiliary input. Port-F pin drivers. Typically used as rear panel microphone. CD in pin drivers. Individual gain control for the Port D (front) input to the analog mixer. Individual gain control for the Port E (aux) input to the analog mixer. Individual gain control for the Port F (rear microphone) input to the analog mixer. Individual gain control for the CD input to the analog mixer. Mute control for Port B (front microphone) into microphone mixer. Mute control for Port F (rear microphone) into the microphone mixer.
17 18 19 1A 1B 1C 1D 1E 1F
Port-E (Aux In) Port-F (Rear Microphone) CD In Port-D Mix Amp Port-E Mix Amp Port-F Mix Amp CD Mix Amp Front Microphone Mute Rear Microphone Mute
4 4 4 3 3 3 3 3 3
Pin complex Pin complex Pin complex Audio selector Audio selector Audio selector Audio selector Audio selector Audio selector
Rev. 0 | Page 10 of 16
AD1981HD
Table 21. Root and Function Node Parameters
NID 00 01
1
Name ROOT FUNCTION
Type ID X X
Vendor ID PID 00 1 11D41981
Revision ID PID 02 00100200
Sub Node Count PID 04 00010001 0002001E
Function Group Type PID 05 00000001
Audio F.G. Caps PID 08 00010C0C
GPIO Caps PID 11 40000004
PID = parameter ID.
Table 22. Widget Parameters
Widget Caps PID 09 1 PCM Size, Stream Rate Format PID 0A PID 0B Pin Caps PID 0C Input Amp Caps PID 0D Con. List Power Len States PID 0E PID 0F Processing Output VendorCaps Amp Caps Specific PID 10 PID F0 PID 12
80053F3D 00000004
NID 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
1
000E007F 00000001 00270300 00000009 00030311 00020060 00000005 00000002 00000441 000E007F 00000001 00000000 00000009 00004601 00100511 0006007F 00000001 00000001 00000009 00400187 0001173F 00270300 00000002 Port-A (Headphone Out) 00400185 0000001F 00000002 MONO_OUT 00400104 00000010 00000001 Port-B (Front Microphone) 00400083 00001727 00270300 00000000 Port-C (Line In) 00400187 00001737 00270300 00000002 S/PDIF_OUT 00400301 00000010 00000001 Monaural Selector 00300101 00000006 Microphone Mixer 00200101 00000002 PC Beep Selector 0030010C 00000002 Analog Mixer 00200101 00000008 Monaural Mixer 00200100 00000001 Digital PC Beep 00700000 00000000 Front Mix Amp 0030010D 00000001 Port-B Mix Amp 0030010D 00000001 Port-C Mix Amp 0030010D 00000001 Analog Power-Down 00500500 00000006 00000009 Record Selector 0030010D 00000008 PC Beep In 00400000 00000020 00000000 Port-E (Aux In) 00400081 00000027 00000000 Port-F (Rear Microphone) 00400187 00001737 00270300 00000002 CD In 00400001 00000020 00000000 Port-D Mix Amp 0030010D 00000001 Port-E Mix Amp 0030010D 00000001 Port-F Mix Amp 0030010D 00000001 CD Mix Amp 0030010D 00000001 Front Microphone Mute 0030010D 00000001 Rear Microphone Mute 0030010D 00000001
Name ROOT FUNCTION S/PDIF Front DAC Record ADC Port-D (Line Out)
00000010
80053F3D 00000008 80053F3D 00000008 80053F3D
00000008
80053F3D 00000008
800B0F0F
80051F17 80051F17 80051F17 80050F00
00000008
80053F3D 00000008 80051F17 80051F17 80051F17 80051F17 80000000 80000000
PID = parameter ID.
Default SSID: BFD10000
Rev. 0 | Page 11 of 16
AD1981HD
Table 23. Default Configuration Parameters
27 24 Location Value Connector Chassis Position 01014010 Jack External Rear 0221401F Jack External Front 90130130 Fixed Internal N/A 02A19040 Jack External Front 01813041 Jack External Rear 01451020 Jack External Rear 90F30150 Fixed Internal N/A 99930144 Fixed Internal Special 3 01A19043 Jack External Rear 99330142 Fixed Internal Special 3 31 30 29 28 23 20 Def. Device Line Out HP Out Speaker Mic In Line In SPDIF Out other AUX Mic In CD 19 16 Conn. Type 1/8" Jack 1/8" Jack ATAPI 1/8" Jack 1/8" Jack Optical ATAPI ATAPI 1/8" Jack ATAPI 15 12 Color Green Green unknown Pink Blue Black unknown unknown Pink unknown 8 7 3 8 4 0 Misc. Ovrrd. Def. Assn. Sequence 0 1 0 0 1 F 1 3 0 0 4 0 0 4 1 0 2 0 1 5 0 1 4 4 0 4 3 1 4 2
Node ID 05 06 07 08 09 0A 16 17 18 19
Name Port-D (Line Out) Port-A (HP Out) Mono Out Port-B (Front MIC) Port-C (Line In) S/PDIF Out PC Beep In Port-E (Aux In) Port-F (Rear MIC) CD In
Table 24. Widget Connection List
0 NID 01 15 03 03 0F 03 02 03 1E 10 0D 0B 03 08 09 0D 0C 1 NID 04 2 NID 3 NID Index 4 NID 5 NID 6 NID 7 NID 8 NID 9 NID
NID 2 3 4 5 6 7 8 9 0A 0B 0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F
Name S/PDIF Front DAC Record ADC Port-D (Line Out) Port-A (Headphone Out) MONO_OUT Port-B (Front Microphone) Port-C (Line In) S/PDIF_OUT Monaural Selector Microphone Mixer PC Beep Selector Analog Mixer Monaural Mixer Digital PC Beep Front Mix Amp Port-B Mix Amp Port-C Mix Amp Analog Power-Down Record Selector PC Beep In Port-E (Aux In) Port-F (Rear Microphone) CD In Port-D Mix Amp Port-E Mix Amp Port-F Mix Amp CD Mix Amp Front Microphone Mute Rear Microphone Mute
0E 0E
0E 0C 1F 16 11 09 0E 05 18
12
13
1A
1B
1C
1D
0E 09
10 0E
11 0F
12 19
13 05
1A 18
1B 17
1C
1D
03 05 17 18 19 08 18
0E
Rev. 0 | Page 12 of 16
STREAM FORMAT
AMPLIFIER GAIN/MUTE
PROCESSING COEFFICIENT
COFFICIENT INDEX
PARAMETER
CONNECTION SELECT
CONNECTION LIST ENTRY
PROCESSING STATE SDATA_IN SELECT
POWER STATE
CHANNEL/ STREAM ID
PIN WIDGET CONTROL
UNSOLICITED ENABLE
PIN SENSE
BEEP GENERATOR
EAPD/BTL ENABLE
DIGITAL CONVERTER 1
GET SET Y
2 2
0xAxx 0x2xx 0x3xx 0x4xx 0x5xx --0x701 --0x703 0x704 0x705 0x706 0x707 0x708 0x709 0x70A 0x70C 0x70D
0xBXX
0xCxx
0xDxx
0xF00
0xF01
0xF02
0xF03
0xF04
0xF05
0xF06
0xF07
0xF08
0xF09
0xF0A
0xF0C
0xF0D 0x70E
NID
NAME
TYPE ID
00 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
1 1 1
ROOT Y
1
X
01 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
FUNCTION
X
Table 25. Widget Verb Support
Y Y
DIGITAL CONVERTER 2
02
S/PDIF
0
03
FRONT DAC
0
04
RECORD ADC
1
05
PORT-D (LINE OUT)
4
06
PORT-A (HEADPHONE OUT)
4
07
08
MONO_OUT PORT-B (FRONT MICROPHONE)
4
4
09
PORT-C (LINE IN)
4
0A
4
0B
S/PDIF_OUT MONAURAL SELECTOR
3
0C
MICROPHONE MIXER
2
0D
PC BEEP SELECTOR
3
0E
ANALOG MIXER
2
Rev. 0 | Page 13 of 16
0F
MONAURAL MIXER
2
10
DIGITAL PC BEEP
7
11
FRONT MIX AMP
3
12
PORT-B MIX AMP
3
13
3
14
PORT-C MIX AMP ANALOG POWERDOWN
5
15
RECORD SELECTOR
3
16
PC BEEP IN
4
17
18
PORT-E (AUX IN) PORT-F (REAR MICROPHONE)
4
4
19
CD IN
4
1A
PORT-D MIX AMP
3
1B
PORT-E MIX AMP
3
1C
PORT-F MIX AMP
3
1D
3
1E
1F
CD MIX AMP FRONT MICROPHONE MUTE REAR MICROPHONE MUTE
3
3
1UNSUPPORTED IN THE AD1981HD. GET VERB ALWAYS RETURNS 0; SET VERBS IGNORED. 2SUPPORTS ADI SPECIFIC FUNCTIONALITY. REFER TO THE AD1981HD PROGRAMMER'S MANUAL FOR MORE INFORMATION.
AD1981HD
04321-003
AD1981HD
Table 26. Widget Extended Verb Support
RESET
GPI DATA
GPI WAKE ENABLE
GPI UNSOLICITED MASK
GPI STICKY MASK GPO DATA
GPIO DATA
GPIO ENABLE
GPIO DIRECTI ON
GPIO WAKE MASK
GPIO UNSOLICITED MASK GPIO STICKY MASK
CONFIG DEF BYTE 1 (07:00) CONFIG DEF BYTE 2 (15:08
CONFIG DEF BYTE 3 (23:16)
CONFIG DEF BYTE 4 (31:24)
SUBSYSTEM ID BYTE 1 (07:00)
SUBSYSTEM ID BYTE 2 (15:08)
SUBSYSTEM ID BYTE 3 (23:16)
NID NAME FUNCTION PORT-D (LINE OUT) PORT-A (HEADPHONE OUT) 4 4 MONO_OUT PORT-B (FRONTMICROPHONE) 4 PORT-C (LINE IN) S/PDIF_OUT 4 4 4 4 4 PC BEEP IN PORT-E (AUX IN) PORT-F (REAR MICROPHONE) CD IN 4 4 Y Y Y Y Y Y Y Y Y Y X Y Y Y
1
GET 0xF10 0xF11 0xF12 0xF13 0xF14 0xF15 0xF16 0xF17 0xF18 0xF19 0xF1A 0xF1C 0xF20 --TYPE ID SET 0x710 0x711 0x712 0x713 0x714 0x715 0x716 0x717 0x718 0x719 0x71A 0x71C 0x71D 0x71E 0x71F 0x720 0x721 0x722 0x723 0x7FF Y
1
01
Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y
Y
Y
Y
SUBSYSTEM ID BYTE 4 (31:24)
Y
05
06
07
Rev. 0 | Page 14 of 16
08
09
0A
16
17
18
19
1UNSUPPORTED IN THE AD1981HD. GET VERB ALWAYS RETURNS 0; SET VERBS IGNORED.
04321-004
AD1981HD JACK PRESENCE DETECTION
HD AUDIO STYLE JACK PRESENCE DETECTION
The AD1981HD uses two jack sense lines for jack presence detection. Combined with the peripheral enumeration engines, this enables software to determine if there is a device plugged into the circuit and what type of device it is. Software can also reconfigure jacks and amplifiers as necessary, ensuring proper audio operation and providing jack retasking. Jack presence is detected using a resistor tree arrangement outlined in the HD audio specification. Up to four jacks can be sensed on a single sense line by using different value resistors for each jack between the sense line and ground (AVSS). Jacks must normally have open, isolated switches to use this method of jack presence detection. Jack presence is reflected in the HD audio pin widget pin sense verb. The MSB (Bit 31) indicates the current plugged state of the connected jack. Jack change interrupts can be enabled using the unsolicited response verb on each of these nodes. Each jack can be set to generate a different value to provide event identification within the software interrupt. There are two methods to connect the codec to the jack presence detection pins. In the first method, use a single 2.69 k 1% resistor between the SENSE_A and SENSE_B lines, but no capacitor. In the second method use a single 2.69 k resister between SENSE_A and AVDD and between SENSE_B and AVDD. In the second method, the designer can add up to 1 F of capacitance on each sense line. Designers should offer both methods for maximum flexibility. The specific resistor value for each jack is shown in Table 27. Use 1% resistors for all jack presence detect circuitry to ensure accurate detection.
CLASSIC JACK PRESENCE DETECTION
The AD1981HD GPIO pins can be used as classic jack sense pins in JS_0- and JS_1-style operation (similar to AD1981B operation). Only two jacks, typically line out and headphone out, are supported in this configuration. The GPIO pins can be connected to the left channel wrap-back switch on the jack via a 2.2 k (typical) resistor. The left channel needs a 20 k (typical) resistor-to-analog ground to complete the circuit. This configuration allows autoconfiguration when other devices are plugged in; for example, when headphones are plugged in, the external speakers are disabled for private listening.
Table 27. Jack Sense Mapping
SENSE_A Resistor (1% tolerance) 5.1 k 10.0 k 20.0 k 39.2 k Name Line Out Line In Front Microphone Headphone Out Port D C B A HD Audio Node ID 0x05 0x09 0x08 0x06 Name N/A N/A Rear Microphone Aux In SENSE_B Port N/A N/A F E HD Audio Node ID N/A N/A 0x18 0x17
Rev. 0 | Page 15 of 16
AD1981HD OUTLINE DIMENSIONS
0.75 0.60 0.45 1.60 MAX
48 1
PIN 1
9.00 BSC SQ
37 36
1.45 1.40 1.35
TOP VIEW
0.20 0.09 7 3.5 0 0.08 MAX COPLANARITY
(PINS DOWN)
7.00 BSC SQ
0.15 0.05
12 13 24
25
SEATING PLANE
VIEW A
0.50 BSC LEAD PITCH
VIEW A
ROTATED 90 CCW
COMPLIANT TO JEDEC STANDARDS MS-026BBC
0.27 0.22 0.17
Figure 4. 48-Lead Low Profile Quad Flat Package [LQFP] (ST-48) Dimensions shown in millimeters
ORDERING GUIDE
Model AD1981HDJSTZ 1 AD1981HDJSTZ-REEL
1
Temperature Range 0C to +70C 0C to +70C
Package Description 48-Lead LQFP, Tray Version 48-Lead LQFP, Reel Version
Package Option ST-48 ST-48
Z = Pb-free part.
(c) 2005 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D04321-0-6/05(0)
Rev. 0 | Page 16 of 16


▲Up To Search▲   

 
Price & Availability of AD1981HDJSTZ

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X